M.2 SSD PS5
-
NE series M.2 NVMe 2242 PCIe 3.0 SSD
Verkaufspreis Ab $57.40 Regulärer Preis$68.99 -
XG7000 M.2 NVMe 2280 PCIe 4.0 SSD
Verkaufspreis Ab $122.99 Regulärer Preis$124.99 -
Limited Edition M.2 NVMe 2280 PCIe 4.0 SSD
Regulärer Preis Ab $90.99 -
Limited Edition M.2 NVMe 2280 PCIe 3.0 SSD
Verkaufspreis Ab $90.99 Regulärer Preis$139.99 -
VP14000 series M.2 NVMe 2280 PCIe 5.0 SSD
Regulärer Preis Ab $262.99 -
X400 series M.2 NVMe 2280 PCIe 4.0 SSD
Verkaufspreis Ab $122.99 Regulärer Preis$124.99 -
X500 series M.2 NVMe 2280 PCIe 5.0 SSD
Regulärer Preis Ab $262.99 -
XF series M.2 NVMe 2230 PCIe 4.0 SSD
Regulärer Preis Ab $135.99 -
XG7000 M.2 NVMe 2242 PCle 4.0 SSD
Regulärer Preis Ab $224.99 -
XF series M.2 NVMe 2280 PCIe 4.0 SSD
Verkaufspreis Ab $117.99 Regulärer Preis$125.99 -
NX series M.2 NVMe 2230 PCIe 3.0 SSD
Regulärer Preis Ab $126.99 -
NXM series M.2 NVMe 2242 PCIe 3.0 SSD
Verkaufspreis Ab $59.99 Regulärer Preis$79.99
PS5 Expansion SSDs
A PS5 SSD is an M.2 NVMe drive that installs in the console's expansion slot. Sony asks for a PCIe Gen4 x4 drive from 250 GB to 8 TB, with 5,500 MB/s or faster read recommended and a cooling structure fitted. KingSpec PCIe 4.0 SSDs are rated up to 7,400 MB/s and go up to 8 TB.
- PCIe Gen4 x4 NVMe
- Up to 7,400 MB/s read
- 512 GB to 8 TB
- Fits PS5, PS5 Slim, PS5 Digital, PS5 Pro
- 3-year warranty

What SSD Does the PS5 Take
The PS5 takes an M.2 NVMe SSD that runs on PCIe Gen4. M.2 SATA drives are not supported, even though they look similar. Here is Sony's published list.
| Requirement | Sony's spec |
|---|---|
| Interface | PCI-Express Gen4x4 M.2 NVMe SSD (Key M) |
| Capacity | 250 GB to 8 TB |
| Form factor | 2230, 2242, 2260, 2280, 22110 |
| Size with cooling | Up to 25 mm wide and 11.25 mm thick (8.0 mm above the board, 2.45 mm below) |
| Sequential read | 5,500 MB/s or faster recommended |
| Cooling | A cooling structure, such as a heatsink or heat transfer sheet, is required |
Source: PlayStation Support, How to add an M.2 SSD to a PS5 console. Update your console's system software before you install.
Which KingSpec SSDs Work in a PS5
Every KingSpec M.2 drive marked PCIe 4.0 and rated at 5,500 MB/s or faster meets Sony's interface and speed guidance. Here is how the full lineup checks out.
| KingSpec model | Interface | Rated read | Size | PS5 fit |
|---|---|---|---|---|
| XG7000 2280 | PCIe 4.0 x4 | 7,400 MB/s | 2280 | Meets spec |
| X400 2280 | PCIe 4.0 x4 | 7,400 MB/s | 2280 | Meets spec |
| Limited Edition PCIe 4.0 | PCIe 4.0 x4 | 7,400 MB/s | 2280 | Meets spec |
| XG7000 2242 | PCIe 4.0 x4 | 7,200 MB/s | 2242 | Meets spec |
| X500 and VP14000 | PCIe 5.0 x4 | 14,000 MB/s | 2280 | Runs at Gen4 speed |
| XF 2280 and XF 2230 | PCIe 4.0 x4 | 5,100 and 5,000 MB/s | 2280, 2230 | Below 5,500 MB/s |
| NX, NE, and NXM series | PCIe 3.0 | Up to 3,500 MB/s | Various | Not supported |
| NT series and 2.5-inch drives | SATA | Up to 580 MB/s | Various | Not supported |
Rated speeds come from KingSpec product spec tables. A PCIe 5.0 drive is backward compatible and runs at PCIe 4.0 speed in a Gen4 slot like the PS5's. Sony notes it cannot guarantee every drive that meets the spec, and that not every game will match the internal SSD's performance.
Does a PS5 SSD Need a Heatsink
Yes. Sony says an M.2 SSD in the PS5 needs a cooling structure, such as a heatsink or a heat transfer sheet. Drives can come with one built in, or you can add one yourself.
- KingSpec drives ship with an ultra-thin graphene heat label or spreader. For the best cooling in the PS5, add a low-profile PS5 heatsink as well.
- Stay inside the size limit. The drive plus heatsink must be no wider than 25 mm and no thicker than 11.25 mm. If the slot cover won't close, the heatsink is too tall.
- Don't double up. If a drive already has a full heatsink built in, Sony advises against adding a second one.
See our PS5 SSD with heatsink picks and read whether a PS5 SSD needs a heatsink.
How Much PS5 SSD Storage Do You Need
Pick the size that holds the games you play in rotation. Game sizes vary a lot, so check each game's file size on PlayStation Store.
- 1 TB. Enough for a handful of large games plus smaller titles.
- 2 TB. The sweet spot for most players who want to stop deleting games.
- 4 TB to 8 TB. For big libraries. The XG7000 reaches 8 TB, the most Sony supports.
Want a plain comparison of internal and USB storage first? Visit our PS5 additional storage page.
How to Install an SSD in a PS5
All you need is a #1 Phillips screwdriver and a clear table. Sony's steps, in short:
- Update and power off. Install the latest system software, then shut down, unplug every cable, and let the console cool.
- Remove the cover. Take off the side or top cover for your model, then unscrew the expansion slot cover.
- Set the spacer. Move the spacer to the hole that matches your drive length, such as 80 mm for a 2280 drive.
- Insert the drive. Hold it at an angle, push it fully into the connector, then press it down and fasten the screw.
- Close up and format. Replace the covers, power on, and follow the on-screen prompt to format the drive.
For photos and model-specific tips, read how to install a PS5 SSD.
Why Choose a KingSpec PS5 SSD
- Clear compatibility. Every PS5-ready drive is a PCIe 4.0 or 5.0 NVMe SSD rated above Sony's 5,500 MB/s guidance.
- Capacities up to 8 TB, matching the PS5's maximum.
- 3-year warranty and support by live chat or email.
- Flexible reuse. The same drives work in gaming PCs and many laptops if you upgrade later.
PS5 SSD FAQ
What kind of SSD do I need for a PS5?
You need an M.2 NVMe SSD on PCIe Gen4 x4, from 250 GB to 8 TB. Sony recommends a sequential read speed of 5,500 MB/s or faster. The drive needs a cooling structure, such as a heatsink or heat transfer sheet. Supported lengths are 2230, 2242, 2260, 2280, and 22110, and M.2 SATA drives will not work.
Is 2TB overkill for a PS5?
No, for most players 2 TB is a sensible size. Large modern games can take up a big share of the console's built-in storage. A 2 TB drive lets you keep many of them installed at once. If you only play one or two games at a time, 1 TB may be enough.
Can I use a PCIe 5.0 SSD in a PS5?
It will run, but only at PCIe 4.0 speed. PCIe is backward compatible, so a Gen5 drive works in the PS5's Gen4 slot. You pay for speed the console can't use. A Gen5 drive makes sense if you plan to move it to a Gen5 PC later.
Will a faster SSD make PS5 games load faster?
Not always. Sony says not all games will match the internal SSD's performance, even when an expansion drive reads faster than 5,500 MB/s. Speed above Sony's guidance mostly gives you headroom. Capacity and good cooling matter more for a smooth experience. If a game stutters on the expansion drive, Sony suggests moving it to internal storage.
Does adding an SSD void my PS5 warranty?
Generally no, according to Sony. Your warranty should not be affected if the drive meets Sony's specs and you follow the install steps. Damage caused by a wrong part or a careless install may not be covered. Remove the M.2 SSD before sending the console for repair.
Shop Related Storage
Helpful Guides
Stop deleting games to make room. Add up to 8 TB of fast storage with a KingSpec PS5 SSD.
Shop the XG7000